| Occupational
Safety Protecting Filter Medium |
|
| Mytrex®
Protecting your health at work
|
|
 |
Mytrex
electret meltblowns provide excellent barrier properties
coupled with open fiber structure giving a tortuous path
along with electrostatic without com promising
air flow. |
|
|
|
|
WHY
USE OUR ELECTRET MELTBLOWN WEBS
Micron fiber is good for filter application
An electret filter traps more small particles
PP fiber is an excellent repellent for blood and body
fluid |
 |
|
|
|
|
| FACE
MASK MEDIA |
 |
Medical
face masks are designed primary to protect the patient
and workers from bacterial contamination in diagnostic
procedures. These masks are usual specified to meet a
bacterial filtration efficiency (BFE) of 95% or greater,
with pressure drops usually below 3mm of water. |
|
|
|
|
| Another
strict requirement is used in operating room or dental
therapeutic procedure. With the intensifying concerns about
contracting AIDS and other dangerous infections, these surgical
masks must allow no strike-through of blood when impacted from a
distance and at a pressure simulating blood spurt from an artery
during surgery. In general, these masks are specified to meet a
BFE of 99% or greater. |
|
| INDUSTRIAL
RESPIRATOR FILTER MEDIA |
| Disposable
industrial mask are used to protect workers in
industrial applications. The test requirements of
industrial respirators are more stringent than required
in surgical masks. All respirators on markets must be
identified by specified organizations, e.g. NIOSH in
American and CEN in Europe, to certify the adequacy of
performance in different industrial working conditions.
In general, sodium chloride aerosol and liquid DOP
aerosol are applied to determine the respective particle
filtration efficiency of hazardous solid dust and
harmful liquid pollution. As the results of our effort
recently years, We offer different specification of our
electret Meltblowns which are applied in N95, P1& P2
specified respirators. |
 |
|
|
|
|
